Once done, pull back the needle threader.
#Singer brilliance 6180 accessories Patch
The small hook present in the threader will patch up the thread and will insert the thread from back to front in the needle. Place the thread on the middle guide of the threader and spin the threader as far as it goes. The automatic needle threader will do the thread insertion with no efforts. The machine is equipped with automatic threading, which makes the ensuing tasks relatively simple. For insertion of bobbin always make sure the needle is kept at a raised positionįor threading place, the thread in the spool pin securing it with the cap and follow the threading guide to take the thread back to the needle clamp maintaining proper tension throughout the thread. The bobbin in the case with the thread hanging out is later placed in the shuttle by opening the hinged cover after removing the extension part. Make sure that the bobbin rotates in a clockwise direction. Pull the thread out by gliding it through the slit. For the purpose, loading take the bobbin case and place the bobbin in it. After the bobbin is done with winding, it is necessary to load bobbin in the shuttle. Take the bobbin out and cut the thread with the thread cutter.
When a sufficient amount of the thread is wound on the bobbin, the machine stops winding. Hold the thread end and step on the foot controller, and the machine starts winding thread on to the bobbin uniformly. Push the bobbin spindle to the right side once it is placed on the spindle so that the bobbin doesn’t get out of the spindle while it is being wound. Insert the thread through any bobbin holes and place it on the winding spindle. Take the thread end and guide it through the adjacent tension guide followed by rotating it anticlockwise on the tension disc. To wind the bobbin in singer brilliance, place the spool of thread on the spool pin and secure it with the spool pin cover. The very first task while dealing with the bobbins is the bobbin winding.
0 kommentar(er)
